Intermec PF2i Bedienungsanleitung PDF herunterladen (Seite 56)

Chapter 2 — Connecting the Printer

42 PF2i and PF4i Mid-Range Printer User’s Manual

Connecting the Printer to Your PC

You can easily connect the printer to your PC using one of these ports:

• RS-232 serial port

• USB device port

• IEEE 1284 communications port (optional, PF4i only)

Connecting the Printer to a PC Through the Serial Port

You can use a serial connection to communicate with your PC and

run PrintSet, LabelShop, or InterDriver. You can also use the serial

port to send commands directly to the printer through a terminal

connection, for instance with Telnet.

Before you can establish a serial connection, make sure that the

settings on the PC match those of your printer.

Serial Port Settings on the Printer

Parameter Default Setting

Baud rate 9600

Data bits (IPL) or Character length (Fingerprint) 8

Parity None

Stop bits 1

RTS/CTS (Fingerprint only) Disable

ENQ/ACK (Fingerprint only) Disable

XON/XOFF, data to host (Fingerprint only) Disable

XON/XOFF, data from host (Fingerprint only) Disable

New line (Fingerprint only) CR/LF

Receive buffer (Fingerprint only) 1024 bytes

Transmit buffer (Fingerprint only) 1024 bytes

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 193 194

Keine Kommentare

Intermec PF2i Bedienungsanleitung Seite 56