Intermec PF2i Bedienungsanleitung PDF herunterladen (Seite 53)

Chapter 1 — Using the Printer

PF2i and PF4i Mid-Range Printer User’s Manual 39

Creating and Printing Labels

The easiest way to create and print labels, is to use the label design

software LabelShop®. You can download LabelShop from the

PrinterCompanion CD that shipped with your printer, or you can

download it from the Downloads page for your printer on the

Intermec web site at www.intermec.com.

You can also use Fingerprint and IPL to create and print labels. For

more information, see the Intermec Fingerprint Command Reference

Manual or the IPL Command Reference Manual.

Printing on RFID Media (PF2i Only)

Media containing RFID tags is slightly thicker where the RFID tag is

located. The slight thickness of this part of the label may affect print

quality. For thermal transfer labels, Intermec recommends using a

high-quality ink ribbon, such as TMX 2304 or TMX 1500.

To achieve the best possible print quality, follow these guidelines:

• After you load RFID media, restart the printer or run a

TESTFEED to let the printer identify the RFID media type.

• If necessary, modify the TAGADJUST variable to make sure that

the RFID labels are properly aligned with the antenna.

• If necessary, avoid printing on the thickest part of the label.

• For printers running Fingerprint:

• If you are using thermal transfer labels, start with the ribbon

constant set to 80 and the ribbon factor set to 25. You may

need to adjust these values depending on the type of media you

choose.

• To write to Gen 2 RFID tags using the TAGFIELD command,

set the start and length parameters to even numbers.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 193 194

Keine Kommentare

Intermec PF2i Bedienungsanleitung Seite 53