Appendix A — Specifications
140 PF2i and PF4i Mid-Range Printer User’s Manual
LSS Detection Position (c)
This position is variable. For help, see “Adjusting the Label Stop
Sensor” on page 107.
Detection Slit Length (d)
The length of the detection slit (excluding corner radii) must be a
minimum of 2.5 mm (0.10 in) on either side of the LSS detection
position (c).
Media Type
Set media type to one of these values:
• Fingerprint: TICKET (w GAPS)
• IPL: MARK
Detection Slit Height (e)
Measurement Value
Maximum 21.3 mm (0.83 in)
Recommended 1.6 mm (0.06 in)
Minimum 1.2 mm (0.05 in)
Note: Do not allow a perforation to break the edge of the media,
because the media may split and jam the printer.
Kommentare zu diesen Handbüchern