Intermec PF2i Bedienungsanleitung PDF herunterladen (Seite 100)

Chapter 3 — Configuring the Printer

86 PF2i and PF4i Mid-Range Printer User’s Manual

Configuring Your Printer With PrintSet

PrintSet is a printer configuration tool that allows you to easily

change your setup parameters. You can also use PrintSet’s setup

wizards to guide you through common configuration tasks.

To configure the printer with PrintSet

1 Make sure that you have a PC running Microsoft Windows 2000

or later.

2 Download PrintSet from the Downloads page of the Intermec web

site at www.intermec.com.

3 Connect your printer to your PC using a serial cable. For help, see

“Connecting the Printer to a PC Through the Serial Port” on

page 42.

Configuring Your Printer With Commands Sent From Your PC

You can change configuration parameters by sending commands

directly to the printer using your terminal program (HyperTerminal)

and a serial or network connection.

If your printer uses the Fingerprint language, you use the SETUP

command, followed by the node, subnode, and parameters setting.

This Fingerprint example sets the media setting to labels with gaps:

SETUP "MEDIA,MEDIA TYPE,LABEL (w GAPS)"

If your printer uses the IPL language, you would send this command:

To see the node, subnode, and parameters for Fingerprint and IPL, see

Appendix C, “Fingerprint and IPL Setup Menus” on page 155.

Fingerprint automatically sends feedback to HyperTerminal as you

type. If you want to see what you are typing with IPL, you need to

perform the following procedure.

Note: You cannot communicate with the printer using PrintSet

through a USB connection. To use PrintSet, you must be connected

serially or through the Ethernet or 802.11 network.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 193 194

Keine Kommentare

Intermec PF2i Bedienungsanleitung Seite 100