Intermec PF2i Bedienungsanleitung PDF herunterladen (Seite 68)

Chapter 2 — Connecting the Printer

54 PF2i and PF4i Mid-Range Printer User’s Manual

To configure the printer to use WPA-PSK or WPA2-PSK mode

1 Send the following commands to login as an admin and set the

SSID:

<STX><ESC>.x,su -p pass admin<ETX>

<STX><SI>ws,SSID,xxxxx<ETX>

where xxxxx can be from 0 to 32 alphanumeric characters.

To enter non-alphanumeric octets, use “%nn,” where nn is two

hexadecimal digits representing the value of the character

2 Send one of the following commands to turn on WPA or WPA2

authentication. Send the WPA-PSK or WPA2-PSK command to set

a pre-shared key:

<STX><SI>ws,WPA_PSK,xxxxxxxxxx<ETX>

where xxxxxxxxxx is a value between 8 and 64 characters.

3 Send the following command to activate the settings:

<STX><SI>ws,ACTIVE,1<ETX>

To configure the printer to use WPA or WPA2 Enterprise mode

1 Send the following commands to login as an admin and set the

SSID:

<STX><ESC>.x,su -p pass admin<ETX>

<STX><SI>ws,SSID,xxxxx<ETX>

where xxxxx can be from 0 to 32 alphanumeric characters.

To enter non-alphanumeric octets, use “%nn,” where nn is two

hexadecimal digits representing the value of the character

Note: The default password for logging in as an admin is “pass.”

If you have changed the password, you need to use your password

instead of “pass.”

Note: The default password for logging in as an admin is pass.

If you have changed the password, you need to use your password

instead of pass.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 193 194

Keine Kommentare

Intermec PF2i Bedienungsanleitung Seite 68