Intermec PF2i Bedienungsanleitung PDF herunterladen (Seite 130)

Chapter 4 — Troubleshooting and Maintaining the Printer

116 PF2i and PF4i Mid-Range Printer User’s Manual

Cleaning the Exterior of the Printer

Clean the exterior of the printer as needed.

To clean the exterior of the printer

• Wipe external surfaces with a soft cloth slightly moistened with

water or a mild detergent.

Cleaning the Media Guides

Both parts of the label stop sensor, which controls the media feed, are

covered by plastic guides. The guides are transparent to allow the light

to pass between the two parts of the label stop sensor. These areas

must be kept clean from dust, stuck labels, and adhesive residue.

If your printer starts to feed labels in an unexpected way, pull out

the upper guide check for objects, such as dust, adhesive residue, or

labels, that may be blocking the beam of light. If necessary, clean the

guides.

To clean the media guide

1 Turn off the printer.

2 Open the media cover.

Isopropyl alcohol [(CH 3)2CHOH; CAS 67-63-0] is a highly

flammable, moderately toxic, and mildly irritating substance.

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 193 194

Keine Kommentare

Intermec PF2i Bedienungsanleitung Seite 130