Intermec IF2 Bedienungsanleitung PDF herunterladen (Seite 65)

Chapter 4 — Managing, Troubleshooting, and Upgrading the IF2

IF2 Network Reader User’s Manual 55

Opening a Serial Connection to the IF2

If you are opening a serial connection to the IF2, you need:

• a null-modem cable (P/N 059167).

• a communications program such as HyperTerminal.

To connect to the IF2 via the serial port

1 Connect the null-modem cable from the serial port on the IF2 to a

serial port on your PC.

2 Start the communications program and configure the serial port

communications parameters to:

• Bits per second: 115200

• Data bits: 8

• Parity: None

• Stop bit: 1

• Flow control: None

3 Connect the IF2 to power. The IF2 boots as soon as you apply

power. In about a minute, the message “Loading System” appears

as the IF2 initializes, and in another minute or two the login

message appears.

The serial connection is established. From here you can do these

tasks:

• You can assign an initial IP address to the IF2 for

configuration. For help, see “Assigning an Initial IP

Address” on page 7.

Note: If you have Microsoft ActiveSync running on your desktop PC,

disable ActiveSync to make the serial port available.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 103 104

Keine Kommentare

Intermec IF2 Bedienungsanleitung Seite 65