Intermec IF2 Bedienungsanleitung PDF herunterladen (Seite 76)

Chapter 4 — Managing, Troubleshooting, and Upgrading the IF2

66 IF2 Network Reader User’s Manual

b Type READ and press Enter. The tag ID appears, indicating

that the module is reading tags.

If the tag ID does not appear, there may be a problem with the

RFID module or antenna system.

Problems With Connectivity

When troubleshooting problems with connectivity, make sure you

know and understand these network-specific items:

• TCP/IP settings

• COM port settings for serial connections

You should also make sure all physical network connectors and cables

are in good working order.

Connectivity Problems and Solutions

Problem Solution

You cannot connect to the IF2

using the serial port.

1 Verify that you are using a null-modem cable to connect to

the desktop PC.

2 Verify that you are communicating through the correct

serial port.

3 Verify that your PC is set to 115200, N, 8, 1, no flow

control.

You cannot connect to the IF2

using a web browser.

1 Verify that you have the correct IP address for the IF2.

2 If you access the Internet through a proxy server, be sure

you have added the IP address of the IF2 to the Exceptions

list.

You cannot load a security

certificate.

You must use a secure web browser connection to load

certificates. For help, see “Using the Web Browser

Interface” on page 10.

You have assigned a static IP

address to the IF2 but cannot

connect to the IF2 over your

network.

Make sure that DHCP is disabled and that your TCP/IP

parameters are set correctly. For help, see “Communicating

with the IF2” on page 7.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 103 104

Keine Kommentare

Intermec IF2 Bedienungsanleitung Seite 76