Intermec IF2 Bedienungsanleitung PDF herunterladen (Seite 74)

Chapter 4 — Managing, Troubleshooting, and Upgrading the IF2

64 IF2 Network Reader User’s Manual

Troubleshooting the IF2

This section includes lists of problems and possible solutions.

Problems While Working With RFID

Many problems you may encounter when working with your RFID

system can be solved by carefully checking the RFID settings and

changing them accordingly. For help, see “About RFID Services” on

page 38.

Connecting Directly to the RFID Module

If your application does not appear to be communicating with the IF2

RFID module, you can use a communications program to verify that

the RFID module is working properly.

You need to know the IF2 IP address to connect directly to the RFID

module. To verify that the RFID reader is reading tags, you need a

known good RFID antenna and at least one good RFID tag.

RFID Problems and Solutions

Problem Solution

The IF2 is unable to read RFID tags,

or seems to read tags slowly or

inconsistently.

Check these conditions:

• Your RFID antennas must be connected correctly to

the IF2 and mounted in optimum locations. Make

sure all antenna connections are tight and that the

cables are in good condition. For help, contact your

Intermec RFID system consultant.

• To maximize IF2 performance, make sure you have

chosen the correct tag types for your application. For

help, see “Configuring BRI Settings” on page 38.

The IF2 does not respond to your RFID

application.

Your application may not be communicating with the

IF2 BRI server.

You may need to change BRI server settings to

communicate with your application. For example, if

your application is running on a desktop PC, you need to

enable external BRI connections to the IF2. For help, see

“Configuring the BRI Server” on page 43.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 103 104

Keine Kommentare

Intermec IF2 Bedienungsanleitung Seite 74