Intermec IF2 Bedienungsanleitung PDF herunterladen (Seite 39)

Chapter 2 — Configuring Network Settings

IF2 Network Reader User’s Manual 29

Changing the Default Login

If you are not using a password server to authorize user logins,

Intermec recommends that you change the default user name and

password and create a read-only password.

To set up logins

1 From the main menu, click Security > Passwords. The Passwords

screen appears.

2 Make sure the Enable RADIUS check box is not checked. Clear

this check box if necessary and then click Activate Changes.

3 Configure the parameters. For help, see the next table.

4 Click Activate Changes to save your changes and immediately

make them active.

Password Parameter Descriptions

Parameter Description

Username Enter the user name you need to use to log in to this IF2.

The user name can be from 1 to 32 characters long. You

must always specify a user name. Default is

intermec.

Password Enter the password you need to use to log in to this IF2.

This password gives you read and write access to the IF2

configuration. The password can be from 8 to 32

characters long. You must always specify a password.

Default is

intermec.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 103 104

Keine Kommentare

Intermec IF2 Bedienungsanleitung Seite 39