Intermec IF2 Bedienungsanleitung PDF herunterladen (Seite 25)

Chapter 1 — Getting Started

IF2 Network Reader User’s Manual 15

Connecting the IF2 to Your Network

After you place the IF2 in its mounting location, you can connect it to

your network.

To connect the IF2 to your network

1 Install the IF2 in its mounting location. For help, see “Installing

the IF2” on page 13.

2 Attach one to four RFID antennas to the RFID antenna ports,

starting with port 1. For help, see “Understanding the Top Panel

Ports” on page 6.

3 Connect an Ethernet cable to the IF2 Ethernet port.

4 Connect power to the IF2:

• If you are using DC power, connect the DC power cord to a

power source, and to the power port on the IF2.

• If you are using Power Over Ethernet, connect the Ethernet

cable to the Ethernet port, and use an 802.3at compliant power

converter to power the IF2.

When you apply power, the IF2 boots and the green Power LED

turns on.

The IF2 is now ready to communicate with your network. Once the

IF2 has been assigned an IP address (either manually or from your

DHCP server), you can use the web browser interface to complete

configuration. For help, see “Using the Web Browser Interface” on

page 10.

Note: If you are using a DHCP server, make sure the server is

running before you connect power to the IF2.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 103 104

Keine Kommentare

Intermec IF2 Bedienungsanleitung Seite 25