Intermec IF2 Bedienungsanleitung PDF herunterladen (Seite 32)

Chapter 2 — Configuring Network Settings

22 IF2 Network Reader User’s Manual

3 Click Activate Changes to save your changes and immediately

make them active.

Ethernet Settings Descriptions

Parameter Description

Enable DHCP Check this check box if you want the IF2 to get its IP address from a

DHCP server.

If this check box is not checked, you need to specify the IP address,

subnet mask, and IP router for your network.

IP Address IP address of the IF2. The IP address has the form x.x.x.x, where x is a

number from 0 to 255.

If DHCP is enabled, the currently assigned IP address appears in this

field.

If DHCP is disabled, specify the IP address in the entry field.

IP Subnet Subnet mask for this network. The subnet mask has the form x.x.x.x,

where x is a number from 0 to 255.

If DHCP is enabled, the currently assigned subnet mask appears in this

field.

If DHCP is disabled, you may need to specify the subnet mask for the

network.

IP Router (Gateway) IP address of the router. The IP address has the form x.x.x.x, where x is a

number from 0 to 255.

If DHCP is enabled, the currently assigned router address appears in this

field.

If DHCP is disabled, you may need to specify the router address for the

network.

Link Local IP Address IP address of the IF2 is only routable on the local IP subnet. The IF2

auto-negotiates with other devices on its Ethernet segment to obtain a

unique address, so no user configuration of the Link Local IP Address is

necessary. The IF2 will always have a Link Local IP Address, even if

another address is assigned through DHCP or statically via user-

configuration.

IPv6 Autoconfigure Enables IPv6 automatic configuration. Clear this check box to disable

IPv6 auto-configuration on the IF2.

Auto-configuration is enabled by default. If you disable auto-

configuration, you need to specify an IPv6 address, subnet mask, and

router.

IPv6 Address 128-bit IPv6 address for the IF2.

IPv6 Router 128-bit address for the IPv6 router.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 103 104

Keine Kommentare

Intermec IF2 Bedienungsanleitung Seite 32