Intermec IF61 Bedienungsanleitung PDF herunterladen (Seite 117)

Chapter 4 — Managing, Troubleshooting, and Upgrading the IF61

IF61 Fixed Reader User’s Manual 103

Connecting Directly to the RFID Module

If your application does not appear to be communicating with the

IF61 RFID module, you can use a communications program to verify

that the RFID module is working properly.

You need to know the IF61 IP address to connect directly to the RFID

module. To verify that the RFID reader is reading tags, you need a

known good RFID antenna and at least one good RFID tag.

To connect directly to the IF61 RFID module and verify operation

1 Make sure the RFID antenna is connected properly to the IF61.

2 Apply power to the IF61.

3 Use a communications program (such as HyperTerminal) to open

a TCP/IP connection to the IF61 with these parameters:

Configure the communications program to echo typed characters

locally and to send line feeds with line ends.

4 Press Enter. The BRI prompt (OK>) appears.

If the prompt does not appear, there may be a problem with the

RFID module or your connection to the module.

Your applications do not automatically

start at boot time.

Make sure your installation includes a configuration file

with the command AUTOSTART=true. Or, use the web

browser interface to configure the application to start at

boot time.

For help with configuration files, see “About

Configuration Files” on page 56.

For help with configuring applications to start at boot

time, see “Auto-Starting Applications at Boot Time”

on page 57.

RFID Problems and Solutions (continued)

Problem Solution

Parameter Value

IP Address IP address of the IF61

Port 2189

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 151 152

Keine Kommentare

Intermec IF61 Bedienungsanleitung Seite 117