Intermec CK60 Bedienungsanleitung PDF herunterladen (Seite 22)

Maximizing Battery Life

When You Want To: Do This to Save Battery Power:

Operate the CK60 and the Low

Battery status icon appears or the

Battery light comes on.

Stop using the CK60 for five

minutes or longer.

Store the CK60 for more than a

day.

Chapter 1 — Using the Computer

8 CK60 Mobile Computer with Windows CE User’s Manual

Checking the Battery Status

The battery status LED above your CK60 keypad, as shown in the

following illustration, indicates the status of your battery. See the following

table to understand the meanings of the lights emitted from the LED.

Battery status LED

Battery Status LED

LED Color Description

Steady Green Battery is more than 95% charged and computer is on a charger.

Blinking Red Battery is low.

Steady Red Main battery is on charge.

Steady Amber The battery is either out of the computer or the pack temperature is

too hot or too cold to charge.

You can also use the Power applet to view the status of this battery. Tap

Start > Settings > Control Panel. Double-tap the Power icon, then tap the

Power tab. Tap OK to exit this applet.

1 Press the power switch to turn off the CK60.

2 Remove the battery and insert another fully

charged battery as quickly as possible or you may

lose state. Or, insert the CK60 into a powered

quad battery charger.

1 Make sure the low battery icon is not on the

screen and that the Battery light is not turned on.

2 Press the power switch to turn off the CK60.

1 Save your state and end your computer session.

2 Press the power switch to turn off the CK60.

3 Insert a fully charged battery.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 123 124

Keine Kommentare

Intermec CK60 Bedienungsanleitung Seite 22