Intermec CK60 Bedienungsanleitung PDF herunterladen (Seite 103)

Chapter 5 — Network Support

CK60 Mobile Computer with Windows CE User’s Manual 89

2 Enter a name for the connection, such as “Direct Connection.” Select

Direct Connection, then tap Next to continue.

3 Select a device through which a connection is made from the Select a

device drop-down list, tap Configure to adjust the port settings, tap OK

to return to the Device screen, then tap Finish.

To disconnect, either detach your device when connected via cable or

cradle, or switch off the connection when connected via a wireless network.

iConnect

The default network adapter or radio is dependent on what radios are

installed in your CK60. With the iConnect menu, using the Enable

feature, you can specify “802.11b,” “Ethernet,” or “No Networking” to

load onto your CK60 when a cold-boot is performed.

If you had specified a network prior to when a warm-boot is performed on

the CK60, the iConnect application restores your network interfaces to

what they were before the warm-boot was performed.

See the Developer’s Support area of the Intermec web site for the latest

information on network adapters for your unit.

4 Insert the necessary equipment into the device, then double-tap the new

Direct Connection icon to connect to the host, then use a program to

automatically begin connecting.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 123 124

Keine Kommentare

Intermec CK60 Bedienungsanleitung Seite 103