Intermec SR30 Betriebsanweisung PDF herunterladen (Seite 19)

Chapter 2 — Connecting and Configuring the SR30

SR30 Handheld Scanner User’s Guide 9

4 If you are using the external power RS-232 cable, connect the

power supply to the RS-232 cable and an AC power outlet.

5 Turn on your host device.

6 If necessary, configure your SR30 serial parameters to match

the host device.

The default serial parameters for the SR30 are:

Baud Rate: 19200

Data Bits: 8

Parity: none

Stop Bits: 1

For help, see “Serial Parameter Bar Codes” on page 14 or

EasySet version 5.6.0.0 or later. EasySet is available on the

Intermec web site at www.intermec.com/EasySet.

To create a keyboard wedge connection

1 Make sure that you have the keyboard wedge cable

(P/N 236-162-xxx) and appropriate power supply (if

necessary).

2 Turn off your host device.

3 Connect the cable to your SR30 and host device.

To host device

AC power supply

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

Keine Kommentare

Intermec SR30 Betriebsanweisung Seite 19