Intermec EASYCODER PL4 Bedienungsanleitung PDF herunterladen (Seite 41)

EasyCoder PL4 Printer User’s Guide 41

5 Set the poll frequency of the printer. The poll frequency

determines how often the printer checks for new e-mail. It is

recommended that you choose a value greater than 10

seconds; otherwise the printer may be unresponsive to other

activity. Set the poll frequency using the following command:

! U1 SETVAR “ip.pop3.poll” “xxx”

where “xxx” is the desired time in seconds for how often the

printer should check for new e-mail.

6 Enable POP3 via the command:

! U1 SETVAR “ip.pop3.enable” “on”

7 If you want the printer to display the headers of the e-mail

messages when they are printed, issue the following

command:

! U1 SETVAR “ip.pop3.print_headers” “on”

8 Test the POP3 e-mail printing. For help, see the next

procedure.

To test the POP3 e-mail printing

1 Print a configuration label and check that the POP3 line

reads on. For help, see “Verifying the Printer Is Working”

earlier in this guide.

2 From your PC, send an e-mail to the POP3 mail account that

the printer is monitoring.

3 Turn the printer off and then back on.

Within 10 seconds, the printer should print out the e-mail

message you just sent.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 64 65

Keine Kommentare

Intermec EASYCODER PL4 Bedienungsanleitung Seite 41