Intermec PM43c Bedienungsanleitung PDF herunterladen (Seite 55)

Chapter 3 — Connect the Printer

PM43 and PM43c Mid-Range Printer User Manual 43

By default, the printer supports DHCP networks.

For descriptions and default settings of wireless communications

settings, See Appendix B.

Configure Wireless Communications from the Web

Page

Use this procedure to configure wireless communications from the

printer web page.

1 Open a web browser on your PC.

2 In the address bar, type the IP address of your printer and press

Enter. The printer web page appears.

3 Click Login. The Login page appears.

4 Type your Username and Password and then click Login. The

default value for Username is admin and the default value for

Password is pass.

5 Click the Configure tab. The Configuration Summary page

appears.

Note: If you are not using a DHCP network, you need to configure

Wi-Fi settings by using Intermec PrintSet through a USB connection

to the printer, by sending commands through a serial connection, or

by using the wizards and settings menus on a full touch printer.

Note: To configure the printer from the web page, the printer must be

turned on and connected to your Wi-Fi or Ethernet network.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 149 150

Keine Kommentare

Intermec PM43c Bedienungsanleitung Seite 55