Intermec CN3e Bedienungsanleitung PDF herunterladen (Seite 49)

Chapter 2 — Connecting and Configuring the CN3

CN3 Series Mobile Computer User’s Manual for Windows Mobile 5.0 37

Your CN3 is SmartSystems-enabled, which lets you open Intermec

Settings from the SmartSystems console to remotely configure all of

your CN3 computers.

To open Intermec Settings from the SmartSystems console

1 In the SmartSystems console, right-click a CN3.

2 Select Intermec Settings.

For more information about SmartSystems Foundation, go to the

Intermec website at www.intermec.com/SmartSystems.

Configuring Local Area Networks

The CN3 is a versatile mobile computer that you can easily add to

your wireless or wired data collection network. You can connect your

CN3 using:

• 802.11b/g radio communications.

• Bluetooth communications.

• Ethernet communications

• USB and serial communications.

Configuring 802.11b/g Radio Communications

Your CN3 has an 802.11b/g radio to transfer data using wireless

communications and supports the TCP/IP network protocols. This

section of the manual assumes that your wireless network is set up,

including your access points.

The CN3 communicates directly with a host computer using TCP/IP.

The access point acts as a bridge allowing communications between

the wired and wireless networks.

Make sure all components with antennas are at least 30 cm (1 ft)

apart when power is applied. Failure to comply could result in

equipment damage.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 141 142

Keine Kommentare

Intermec CN3e Bedienungsanleitung Seite 49