Intermec CN2 Bedienungsanleitung PDF herunterladen (Seite 96)

Chapter 5 — Troubleshooting and Maintaining the CN2

84 CN2 Handheld Computer User’s Manual

Problems and Solutions

These tables offer solutions to the problems you may encounter.

Problems While Operating the CN2

Problem Solution

You press the Power key to turn

on the CN2 and nothing

happens.

Try these possible solutions in order:

• Make sure the battery door is installed correctly and

completely closed.

• Make sure you have a charged battery installed

correctly. For help, see “Installing and Charging the

Battery” on page 6.

• The battery may be discharged. Replace the battery

with a spare charged battery, or charge the battery

and try again.

• Warm boot the CN2. For help, see “Warm Booting

the CN2” on page 94.

You press the Power key to turn

off the CN2 and nothing

happens.

To turn off (or suspend) the CN2, you need to hold

the Power key for 2 to 3 seconds and then release it.

If the CN2 is processing data, it may not turn off when

you press the Power key. Wait until the CN2 finishes

processing.

If the CN2 appears to be locked up, warm boot the

CN2. For help, see “Warm Booting the CN2” on page

94.

If the CN2 does not respond to a warm boot, see “Cold

Booting the CN2” on page 95.

The CN2 screen is not

responding to the stylus.

Try these possible solutions in order:

• Recalibrate the screen. For help, see “Calibrating the

Screen” on page 17.

• Press and hold the Power key for 2 to 3 seconds,

and then release it to turn off the CN2. Press the

Power key again to turn on the CN2.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 133 134

Keine Kommentare

Intermec CN2 Bedienungsanleitung Seite 96