Intermec CK61 Bedienungsanleitung PDF herunterladen (Seite 46)

Chapter 2 — Connecting and Configuring the CK61

34 CK61 Handheld Computer User’s Manual With Windows CE

Configuring Ethernet Communications

You can use your computer directly in an Ethernet network if you use

the Ethernet and modem adapter and one of the communications

docks. The modem adapter provides an RJ-45 connector off of it to

connect to your Ethernet network.

To use your computer in an Ethernet network

1 Tap the iConnect icon ( ) in the Windows CE taskbar. The

iConnect pop-up menu appears.

2 Select Enable > Ethernet.

3 (Optional) Configure the IP Settings for the Ethernet Adapter if

you are not using DHCP. DHCP is the default setting.

4 (Optional) If required for your network, you may also need to set

these parameters on each computer:

• Primary and secondary DNS servers

• Primary and secondary WINS servers

5 Make sure that your computer is talking to the network and that

the network can see your computer.

Configuring 802.11 Radio Communications

The CK61 may have an internal 802.11 b/g radio to transfer data

using wireless communications. This section of the manual assumes

that you have already set up your wireless communications network

including your access points. If you are using a UDP Plus network,

have your Intermec Application Server communicate with a host

computer.

Your computer supports these network protocols:

• TCP/IP

• UDP Plus

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 125 126

Keine Kommentare

Intermec CK61 Bedienungsanleitung Seite 46