Intermec 700 Color Bedienungsanleitung PDF herunterladen (Seite 118)

Network SupportChapter —4

100 700 Series Color Mobile Computer User’s Manual

About the Application

Bluetooth is not started automatically by default after a cold-boot is per-

formed. To run Bluetooth, tap Start > Settings >theConnections tab >

the Bluetooth icon. The 700 Color Computer retains the Bluetooth state

when warm-boots are performed, for example:

S If Bluetooth is active, and a war m-boot was performed, the 700 Color

Computer boots up with the Bluetooth state activated and Bluetooth

virtual COM ports (such as printing) registered. However, you must

reactivate connections, as the system does not do these automatically.

S If Bluetooth is inactive, and a warm-boot was performed, the 700 Color

Computer boots u p with Bluetooth deactivated.

Mode

The default tab activates or deactivates Bluetooth. When Bluetooth is acti-

vated, the 700 Color Computer discovers and connects to remote devices.

700 Color Screen

730 Screen

Wireless Printing

Use this tab to print via Bluetooth devices. Tap Device Discovery to dis-

cover (or scan) for remote Bluetooth devices. When the 700 Color Com-

puter is finished scanning, any newly discovered devices appear in the up-

per Devices box.

Tap Clear Devices to remove the list from the Devices box.

To print to a Bluetooth device, select any of the devices listed in the

Devices box, then tap Connect. O nce connected, the selected device

moves to the lower Connected box.

To view connection information or register a C OM port for a device,

from the lower Connected box, select a device, then tap Properties. See

“Properties” on the next page for information.

When done printing to a device, select that device in the Connected box,

then tap Disconnect. This moves the device in question back to the upper

Devices box.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 297 298

Keine Kommentare

Intermec 700 Color Bedienungsanleitung Seite 118