Intermec SF61B 1D Betriebsanweisung PDF herunterladen (Seite 86)

Chapter 4 — Troubleshoot and Maintain the SF61B

74 SF61 Cordless Scanner User’s Guide

7 Click OK to continue.

8 Select the Outgoing COM port your SF61B is connected to.

Note: If you do not proceed with the firmware upgrade procedure

within 5 minutes, the scanner performs a restart (emits two beeps and

vibrates). Close WinFlash and close EasySet and repeat the entire

procedure including removing your SF61B from the host’s list of

Bluetooth devices and re-pairing with the host system.

If you cannot re-pair successfully after interrupting the software

upgrade (you cannot see the Outgoing and Incoming virtual COM

ports in your host PC’s Bluetooth settings), try the following

workaround:

• remove your scanner from your host’s device list if present

• pair and connect your scanner using the HID profile

• disconnect your scanner from this HID connection (your

scanner should no longer be present in the host’s device list)

• repeat the entire firmware upgrade procedure including

removing your SF61B from the host’s list of Bluetooth devices

(if applicable) and re-pairing with the host system

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 103 104

Keine Kommentare

Intermec SF61B 1D Betriebsanweisung Seite 86